Crow Road: Cycling Climb

The climb · United Kingdom

About Crow Road

Collections

Crow Road gives Lennoxtown a direct route into the Campsie Fells. Riding north from the town, the climb begins among the lower slopes before the road winds higher onto more open ground. The ascent stretches for about 5.6 kilometres, gaining roughly 285 metres in total, and its length allows the landscape and the effort to change gradually rather than all at once.

The opening is comparatively measured. Farther up, the middle section asks for more sustained work, before the gradient softens towards the upper end. That shape makes the climb feel longer and more varied than a simple ramp out of town. Woodland and the settled valley give way to a broader hillside setting, with the bends marking the change. The main satisfaction is in the distance gained from Lennoxtown: a substantial climb with space to settle into it.

01 / The ascent

Elevation profile

Start 66 m · Summit 337 m

Gradient by distance5.61 km / 286 m gain

0 km1.1 km2.2 km3.4 km4.5 km5.6 km

02 / The crux

Where it gets difficult

Choose a distance to find the steepest continuous section of the climb.

Steepest 500 m average

13.9%

Where to find it

2.80–3.30 km from start

Net height gained: 69 m
Section length: 500 m

The whole climb5.61 km

0 kmFinish

03 / The numbers

Climb statistics

Distance: 5.61 km
Elevation gain: 286 m
Average gradient: 4.8%
Climb category: 3
Start elevation: 66 m
Summit elevation: 337 m

Current weather

At the climb start

Loading weather…

Weather data: MET Norway

04 / Your effort

How long would it take?

Enter the power you could hold for the whole climb. We calculate a moving time from the elevation profile and the forces you ride against.

Sustained power

W/kg

Use your intended climbing effort, rather than FTP unless you can hold it for the predicted duration.

Rider weight (kg)

Bike + kit weight (kg)

Bike + kit includes clothing, bottles and luggage.

Advanced settings

Defaults represent a road-bike scenario. Adjust these settings to match your tyres, drivetrain and riding position.

Effective drag area (CdA) (m²)

Rolling resistance (Crr)

Drivetrain efficiency (%)

Modelled moving time

21 min

Power throughout: 225 W
Average speed: 15.8 km/h

Based on the 5.61 km elevation profile. Assumes steady power, with no stops, braking or drafting. Rounded to the nearest minute.

The science behind the calculation

For each part of the stored profile, we solve the steady-state cycling power equation for speed, then add distance ÷ speed across the climb. Gravity uses rider + equipment weight; available power is W/kg × rider weight. This uses the profile’s distance and elevation together, without mixing in another route’s metrics.

Power × efficiency = gravity + rolling resistance + air resistance + bearing losses

The resistance equations are adapted from Martin et al. (1998), Validation of a Mathematical Model for Road Cycling Power. Air density changes with profile altitude using NASA’s standard-atmosphere model. This calculator’s adaptation has not been independently validated.

It predicts travel at the power you enter, including on descents. It does not model acceleration, cornering, braking, traffic, wind, changing weather or fatigue. At altitude, choose power you can sustain there: thinner air reduces drag, but this model does not predict its effect on your ability to produce power. Profile quality and assumed equipment settings also affect the result.

05 / On the ground