Craigowl Hill: Cycling Climb

The climb · United Kingdom

About Craigowl Hill

Collections

Simon Warren’s Cycling Climbs of Scotland

Craigowl's masts give this ascent a visible purpose, standing above the farmland north of Dundee. The approach rises from the south-east on narrow roads past fields and scattered homes before turning towards the hill's service road. There is little of the winding, sheltered progression of a glen climb here. As the road straightens towards the communications buildings, the hillside occupies more of the view and the effort becomes harder to ignore.

Over about 3.4 kilometres, the ascent averages nearly 9%, with much of its severity concentrated higher up. Gates mark the transition onto the private service road; the setting is working farmland and communications infrastructure rather than a conventional mountain pass. The upper road curls around the hill towards the masts, where the outlook broadens over Dundee and the surrounding fields. Compact, exposed and increasingly steep, Craigowl makes a substantial climb out of a modest distance.

01 / The ascent

Elevation profile

Start 156 m · Summit 450 m

Gradient by distance3.38 km / 296 m gain

0 km0.7 km1.4 km2 km2.7 km3.4 km

02 / The crux

Where it gets difficult

Choose a distance to find the steepest continuous section of the climb.

Steepest 500 m average

18.0%

Where to find it

2.20–2.70 km from start

Net height gained: 90 m
Section length: 500 m

The whole climb3.38 km

0 kmFinish

03 / The numbers

Climb statistics

Distance: 3.38 km
Elevation gain: 296 m
Average gradient: 8.7%
Climb category: 3
Start elevation: 156 m
Summit elevation: 450 m

Current weather

At the climb start

Loading weather…

Weather data: MET Norway

04 / Your effort

How long would it take?

Enter the power you could hold for the whole climb. We calculate a moving time from the elevation profile and the forces you ride against.

Sustained power

W/kg

Use your intended climbing effort, rather than FTP unless you can hold it for the predicted duration.

Rider weight (kg)

Bike + kit weight (kg)

Bike + kit includes clothing, bottles and luggage.

Advanced settings

Defaults represent a road-bike scenario. Adjust these settings to match your tyres, drivetrain and riding position.

Effective drag area (CdA) (m²)

Rolling resistance (Crr)

Drivetrain efficiency (%)

Modelled moving time

20 min

Power throughout: 225 W
Average speed: 10.1 km/h

Based on the 3.38 km elevation profile. Assumes steady power, with no stops, braking or drafting. Rounded to the nearest minute.

The science behind the calculation

For each part of the stored profile, we solve the steady-state cycling power equation for speed, then add distance ÷ speed across the climb. Gravity uses rider + equipment weight; available power is W/kg × rider weight. This uses the profile’s distance and elevation together, without mixing in another route’s metrics.

Power × efficiency = gravity + rolling resistance + air resistance + bearing losses

The resistance equations are adapted from Martin et al. (1998), Validation of a Mathematical Model for Road Cycling Power. Air density changes with profile altitude using NASA’s standard-atmosphere model. This calculator’s adaptation has not been independently validated.

It predicts travel at the power you enter, including on descents. It does not model acceleration, cornering, braking, traffic, wind, changing weather or fatigue. At altitude, choose power you can sustain there: thinner air reduces drag, but this model does not predict its effect on your ability to produce power. Profile quality and assumed equipment settings also affect the result.

05 / On the ground