White Castle: Cycling Climb

The climb · United Kingdom

About White Castle

Collections

Simon Warren’s Cycling Climbs of Scotland

The road southeast from Garvald climbs into the northern edge of the Lammermuir Hills, towards the earthworks of White Castle. Over roughly 3.8 kilometres, the ascent gains about 210 metres, following the hillside into a more open setting above East Lothian. The fort stands beside the upper road, giving the climb a recognisable landmark without the need for a summit sign or a dramatic final ramp.

Height comes in steadily across the route, although the bends and changing gradient stop it feeling like a uniform slope. Pasture and moorland frame the higher section, while the land you have climbed out of opens behind you towards the Lothian Plain. The road continues across the hills towards the Whiteadder valley, but this approach has its own identity: a winding ascent from the lower country to a fort set among the upland slopes.

01 / The ascent

Elevation profile

Start 141 m · Summit 342 m

Gradient by distance3.85 km / 210 m gain

0 km0.8 km1.5 km2.3 km3.1 km3.8 km

02 / The crux

Where it gets difficult

Choose a distance to find the steepest continuous section of the climb.

Steepest 500 m average

10.9%

Where to find it

3.00–3.50 km from start

Net height gained: 54 m
Section length: 500 m

The whole climb3.85 km

0 kmFinish

03 / The numbers

Climb statistics

Distance: 3.85 km
Elevation gain: 210 m
Average gradient: 5.2%
Climb category: 3
Start elevation: 141 m
Summit elevation: 342 m

Current weather

At the climb start

Loading weather…

Weather data: MET Norway

04 / Your effort

How long would it take?

Enter the power you could hold for the whole climb. We calculate a moving time from the elevation profile and the forces you ride against.

Sustained power

W/kg

Use your intended climbing effort, rather than FTP unless you can hold it for the predicted duration.

Rider weight (kg)

Bike + kit weight (kg)

Bike + kit includes clothing, bottles and luggage.

Advanced settings

Defaults represent a road-bike scenario. Adjust these settings to match your tyres, drivetrain and riding position.

Effective drag area (CdA) (m²)

Rolling resistance (Crr)

Drivetrain efficiency (%)

Modelled moving time

16 min

Power throughout: 225 W
Average speed: 14.6 km/h

Based on the 3.85 km elevation profile. Assumes steady power, with no stops, braking or drafting. Rounded to the nearest minute.

The science behind the calculation

For each part of the stored profile, we solve the steady-state cycling power equation for speed, then add distance ÷ speed across the climb. Gravity uses rider + equipment weight; available power is W/kg × rider weight. This uses the profile’s distance and elevation together, without mixing in another route’s metrics.

Power × efficiency = gravity + rolling resistance + air resistance + bearing losses

The resistance equations are adapted from Martin et al. (1998), Validation of a Mathematical Model for Road Cycling Power. Air density changes with profile altitude using NASA’s standard-atmosphere model. This calculator’s adaptation has not been independently validated.

It predicts travel at the power you enter, including on descents. It does not model acceleration, cornering, braking, traffic, wind, changing weather or fatigue. At altitude, choose power you can sustain there: thinner air reduces drag, but this model does not predict its effect on your ability to produce power. Profile quality and assumed equipment settings also affect the result.

05 / On the ground